Merchantable Grade :
Use: A smaller knot, pith free, intermediate utility timber graded on its best face and edge. For use in Door and Furniture manufacture where the knots are. Used in the final product and / or veneered. Asia and Australian markets.
Sizes Available: Width Thickness Length
75/100/150 25mm 1.8m 每 6.0m
75/100/150/200 32mm 1.8 每 6.0m
75/100/125/150 40mm 1.8 每 6.0m
75/100/125/150/200 50mm 1.8 每 6.0m
100% FSC Certified Available: SGS 每 COC - 0941
Permitted Defects
• All knots other than loose knots/ holes |
Unrestricted in number |
2. Loose knots and holes |
Not to exceed 20mm wide.Maximum of 4 per board
|
3. Tight encased knot up to 15mm |
|
3. Surface Checks |
Maximum 100 mm long |
4. Bark and resin pockets |
Maximum 10 mm (W) x 100 mm (L) |
5. Resin Streaks |
20mm (W) x 200mm (L) 每 No restriction |
Non Permitted Defects: Pith / Heavy resin / Heavy needle fleck / dead knot
Back Face |
Wane: Max: 10 mm face, 5mm edge.Maximum 1/4 length.
|
Grade Mark: M
Note: Merchantable Grade is unsuitable for defecting clear components
